This is not a forwarded call. Check the display on the 7665's. This may be your only chance.
You can change the ring tones for CO lines on the 7665's, but your options are limited to 8. If there is one phone in the bar, I would use the 7630 which can provide up to 30 ring tones. If you are using POTS phones, you may have a problem. Your only chance then is to use an external ringer with an analog port programmed for the other incoming lines. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jody C Sent: Monday, October 08, 2007 1:06 PM To: [email protected] Subject: KX-T: Different ringing tone Hi all I have a KXTDDA 200 (UK version) with a fractional primary rate ISDN line connected, 40 X 7665 & 32 SLT The incoming ringing goes to the first ICD group which rings the reception phone first and then after 5 seconds rings the phones in the bars upstairs All of this works fine but the customer wants some way for the staff to know that the call ringing is being forwarded from the reception phone and not a direct call into the bar Some form of different ring tone or the call appearing on a different button would work but because the line is a fractional rate all the lines are in the same group and cant be assigned to a different group. Anyone any ideas how I can get these calls to ring differently? Any help would be appreciated Jody _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
