I agree with the rest in the forum that you need to set up a VPN. You can’t pass voice through NAT, that’s why you have established only one way conversation.
As for your problem with connection losses, you have to go to card property of V-IPEXT32 and set the “keep alive time-out” to disable. Best regards. Christos Kalos Technical Support ------------------------------------ Genius Systems Εξειδικευμένες Εφαρμογές Ηλεκτρονικών Συστημάτων ΑΝΤΙΓΟΝΗΣ 112 & ΛΕΝΟΡΜΑΝ 10443, ΑΘΗΝΑ Τηλ: +30.210-5152601 Fax: +30.210-5152832 www.genius.gr | [email protected] ----- Original Message ----- From: "Michael Duffy" <[email protected]> To: "KXT Mailing list" <[email protected]> Sent: Thursday, December 11, 2008 11:55 PM Subject: KX-T: KXTDE 100 > > > Hi All > > > > Can anybody help me with the setting up of IP extension model KXNT321 on a > KXDTE 100. The IP extension is off site extension using a static IP > address > connected directly back to a firewall which have all the relevant ports > open > for the KXTDE 100. > > The problem I am having is as follows, when I connected the phone to the > external switch/hub it finds the PBX for about 5 minutes the time and date > appear on the phone, I hear the internal dial tone but cannot hear the > external dial tone and have only one way conversation. Then after about 5 > minutes the phone losses connection with the PBX. Its takes about 1 hour > for > the IP extension to reboot again because I think the LAN ports on the PBX > lock up. > > > > Any ideas > > > > Regards > > > > Michael > > > > > > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
