At 02:12 PM 4/3/2009, Paul Tys wrote: >Hi, some help please. > >I have a Panasonic KXTD 1232 with 12 Analogue Line. > >I am trying to do a parallel connection between a Pan KXTD 7431 >(Digital Phone) and a 2 wire ordinary Pot phone. > >The socket i have done for the Digital KXtd 7431 phone is L & H, >positions 1 and 6 on a secondary socket > >The socket i have done for the 2 wire ordinary phone is A & B, >positions 2 and 5, Master Socket > >On the panasonic KXTD 7431 phone I have enabled parallel connection >via entering 691 to activate on the phone. > >In programming sequence 600 i have enabled XDP option, which would >give the extension of 306 for the ordinary 2 wire POT phone, the >Digital phone is extension 206. > >However, The Pan 7431 works perfect as usual, but I cannot get the >Parallel ordinay telephone to work. If i go off hook on the Pot I do >not get any dial phone, when i ring into extension 206 (Pan 7431 >Digital Telephone rings but not the parrelled 2 Wire Pot phone) > >What have I done wrong (i dont think ive done anything wrong) or >what do i need to do to get both digital and 2 wire pot to work together. > >Many thanks in advance for any help given,
On our side of the pond we use pins 3&4. Unplug the digital phone and plug your single line device into the socket. If it doesn't work, look for a cable that converts or uses the center pins and test it. Carl _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
