pick up dial is set at that station. pickup intercom and dial 740 within one second (at least the 7, then timer doesn't apply) to turn off pickup dial feature.
you can go into system programming and set pick up dial timer to a bigger number than 1(sec) to be able to clear the feature. -larry hint: change pud and other trouble maker feature codes to include a star, like change 74 to 7*4, 741 becomes 7*41 Jim Gottlieb wrote: > I have a client with a KX-TD816 (same as KX-TD1232) and one of their > stations is in a state where when they go off hook on the intercom, > the display says "Not Valid" and they don't get a dial tone. > > I'm guessing that someone accidentally dialed some code (usually they > forget to dial 9 and end up dialing some feature code) that did this, > and normally when this happens I tell them to dial 790 for a station > reset. But in this case, they can't. > > Does anyone know how I can do the equivalent from the extension on the > first port or through programming? > > Thanks... > > Jim Gottlieb > San Diego, California > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
