Brent - Punch down the fax line at the punch block to the middle pairs of that extension where the fax is connected to. Turn off XDP for that extension. Connect the fax machine to the XDP port on the back of the phone or split the jack on the wall so that the DATA wires (outside pairs) are connected to the phone and the middle pairs are connected to the fax machine. You will have that fax line connected to the fax machine directly. It is best not to connect the fax machine as an active XDP or as an extension on the KSU for you will get transmission errors. This can be done as long as you have both pairs available instead of one pair.
Armando Flores Systems Designer InnerSpace Electronics, Inc. 914-937-9700 - Office 914-937-3374 - Fax [email protected] - email -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Brent Sent: Thursday, October 07, 2010 1:20 PM To: [email protected] Subject: KX-T: Help with XDP for FAX Thank you all for the ideas. I believe I have tried them all and still no joy. I guess the next step is to build sets of break out boxes to put at each end of the station line to carry the fax analog line to the FAX machine. I will watch this e-mail string for any other ideas and start building. Thanks again. Brent [email protected] _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
