I'm installing a TA 624-3 with a TVS50 for the first time. The 624-3 came
as a package with OGM-FAX card installed. Should I remove that card since
it seems that the TVS50 will do all those operations. This 624 is
configured with a base 3x8 but has an additional 8 extension card. Do I use
ports 7 & 8 on the first board to connect the TVS? Will the stations go
from 101 through 106 and then skip to 117 to 124.
I know I can rename them but this will work out OK. I guess (having the
missing sta 109 to 116)
I'm having a little trouble at programing the tvs50. Any tips other than
what the CD manual provides will be helpful. When you do the quik setup,
should the 624 be completely programmed and hooked up to the TVS50. The
first tvs50, as I recall did not have 2-way recording. It now appears that
the feature has been added. I'm using all 7135 phones. What PF buttons
should I use (besides the message waiting button), LCS and two way
recording should I set up as tvs-50 controls?
Thanks guys for all your help,
Tom
Abraham Communications/Houston
*********************************************************
* To unsubscribe, e-mail [EMAIL PROTECTED] *
* The KXT-Digest Home Page: http://kxthelp.com/ *
*********************************************************
