very easy- ***IF YOU WILL BE REMOVING POWER TO THE TVS50 DURING THE INSTALL OF THE TD1232- MAKE SURE THAT ALL FOUR DIP SWITCHES ON THE TVS50 ARE ALL TOWARDS THE LEFT*** - OTHERWISE YOU MIGHT LOSE ALL DATA AND ACCIDENTALLY INITIALIZE THE SYSTEM AT POWER-UP!!!
First make sure that you have all 4 wires from an extension off of the digital connected to jack 1 of the tvs ( since you now will have a d1232 using what Panasonic calls a DPITS data connection with the tvs, you will get the two vm ports by using only one extension, (the second jack on the tvs50 becomes disabled in the dpits connection of jack ) as long as your td1232 is a recent model. If it is more than 3-4 yrs old then you might not get the DPITS connection. as long as the d1232 is a dash 1,2,3 or 4 it should have DPITS.) the 616 connection to the tvs50 worked off of the audio pair (the inside, red/green ) the d1232 works off of the data pair.(the outside,yel/blk - pair of the plug ) there should be only one programming change in the tvs that you have to make - go into hardware settings / pbx settings and set the system type to "KXT series - td816/1232" you will not lose any other programming or prompts. at this point, the tvs power lite will start flashing, and it will be off-line until you make the connection and program the td1232 for DPITS. Programming in the digital system - program #117(voice mail integration)- enter the extension number of the d1232 that you have connected to the tvs. once you do this, and if your tvs is correctly connected, then the power lite should come back on steady - and on-line. the 2 tvs extensions now will be extensions 165 and 166, and you should be ready to go. You should not lose any data or greetings that you already have in use. good luck - JOEL WEISER Too all of you who remember talking to me over the past few years, when I was working and taking your calls at panasonic tech support, I just want to say hello and I hope that everyone is doing ok. After leaving Panasonic, I am now doing pre-sales consulting / system programming and sometimes full installs for a number of local dealers. ( and selling and installing jobs for myself , when i can get them.) If anyone needs my assistance, on a sub-contracting/consulting basis, or you just want to say hello, please feel free to contact me at [EMAIL PROTECTED] (also, any sincere job offers are always welcome!!) - JOEL WEISER -----Original Message----- From: Richard McCoy <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: Friday, October 12, 2001 3:01 PM Subject: KX-T: TVS50 Change Analog to Digital >I have a TVS50 connected to a Panasonic analog 616 and I am converting the 616 to a KXT1232 digital. I have the new 1232 all set up on my test bench and ready to install, but I can't hook up the TVS50 until we install the 1232 at our business. What do I need to do on the TVS50 in order to change it to use the digital features on the 1232, and I'd like to not lose my prompts, and settings on the TVS50 in the process. Any ideas and steps would be appreciated. > >Rick McCoy >Lopez Island Pharmacy > > > > > ********************************************************* > * To unsubscribe, e-mail [EMAIL PROTECTED] * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* > ********************************************************* * To unsubscribe, e-mail [EMAIL PROTECTED] * * The KXT-Digest Home Page: http://kxthelp.com/ * *********************************************************
