----- Original Message ----- From: "Jacques Leisy" <[EMAIL PROTECTED]> To: "Richard McCoy" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Saturday, October 13, 2001 6:39 PM Subject: RE: KX-T: TVS50 Ports
> On my KTXTD308 I only need one port (4 wires though) for the 2 ports You're really only using two of the four wires -- the "data pair," which is black and yellow in a standard phone jack. Michael N. Marcus AbleComm, Inc. www.ablecomm.com www.theTekHouse.com -- our 12th website > > JL > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Richard McCoy > Sent: Saturday, October 13, 2001 1:29 PM > To: [EMAIL PROTECTED] > Subject: KX-T: TVS50 Ports > > > I'm changing a TVS50 from a Panasonic analog phone system to a KXTD1232 > digital. On the analog system I use both ports of the TVS50, but it appears > from the documentatin in the TVS50 that I only use one port on the TVS50 if > used with a KCTD1232. Is this correct or should I use both ports? > > > > > ********************************************************* > * To unsubscribe, e-mail [EMAIL PROTECTED] * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* > > > > ********************************************************* > * To unsubscribe, e-mail [EMAIL PROTECTED] * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* > ********************************************************* * To unsubscribe, e-mail [EMAIL PROTECTED] * * The KXT-Digest Home Page: http://kxthelp.com/ * *********************************************************
