Hi Luis, Please correct me if i am wrong here.
You have checked below Case 3 & Case 4 and found errors. Case 3 errors :- https://jenkins.opendaylight.org/releng/view/l2switch/job/l2switch-csit-1node-switch-only-boron/291/robot/report/log.html Case 4 erros :- https://jenkins.opendaylight.org/releng/view/l2switch/job/l2switch-csit-1node-switch-only-boron/296/robot/report/log.html L2Switch Patch - https://git.opendaylight.org/gerrit/#/c/33304/ & https://git.opendaylight.org/gerrit/#/c/33303/ OFP Patch - https://git.opendaylight.org/gerrit/#/c/35892/ Current L2 switch code (with out patch ) points to features-openflowplugin which is equivalent to OFP-he Case 1: Current L2 switch (should point to OFP-He) & Current OFP (should point to OFP-He) --> Should pass Case 2: L2 switch with patch (should point to OFP-Li) & Current OFP (should point to OFP-He) --> Should Fail Case 3: Current L2 switch (should point to OFP-He) & OFP with patch (should point to OFP-Li) --> Should Fail Case 4: L2 switch with patch (should point to OFP-Li) & OFP with patch (should point to OFP-Li) --> Should Pass Regards, Sai Reddy Brocade Communications On Thu, Apr 14, 2016 at 4:03 PM, Luis Gomez <[email protected]> wrote: > And this second test report is when I just apply ofplugin Li patch [2]: > > > https://jenkins.opendaylight.org/releng/view/l2switch/job/l2switch-csit-1node-switch-only-boron/296/robot/report/log.html > > I see SAME issues as with l2switch Li plugin patch + some weird topology > display issue (internal topology works as otherwise ping would not work but > switch links are not shown) the second time we run Host Tracker test. > > BR/Luis > > [2] https://git.opendaylight.org/gerrit/#/c/35892/ > > > On Apr 13, 2016, at 7:32 PM, Luis Gomez <[email protected]> wrote: > > From today’s l2switch call, I got action point to run system test on Li > patch [1]: > > > https://jenkins.opendaylight.org/releng/view/l2switch/job/l2switch-csit-1node-switch-only-boron/291/robot/report/log.html > > From the result above we can observe following issues: > > - Flow push: There is no LLDP flows being pushed. Also flood flows seem to > be in config space because operational shows flow ID. > - Address Tracker: All host IP addresses are seeing in all nodes, that is > not right, only node connected to host should show the host. > - Host Tracker: After remove/add OpenFlow port (ovs-vsctl add-port), no > host is learned anymore through that port. > - Loop Remover: Not working, using a loop topology, even when we observe > some ports are in DISCARD mode, mininet sees DUP packets. > > BR/Luis > > [1] https://git.opendaylight.org/gerrit/#/c/33303/ > > > > > _______________________________________________ > L2switch-dev mailing list > [email protected] > https://lists.opendaylight.org/mailman/listinfo/l2switch-dev > >
_______________________________________________ L2switch-dev mailing list [email protected] https://lists.opendaylight.org/mailman/listinfo/l2switch-dev
