Hi,
Could you tune ARM_SMC_USER_MIN/ARM_SMC_USER_MAX in the kernel? Seems
the SMC functions asked are 0x8200ff03U and 0xC2000xxx and that's not
covered by the default range, so increasing ARM_SMC_USER_MAX to
0xcfffffff or so.
Adam
On Mon Apr 28, 2025 at 15:00:04 +0000, Moshe Kravchik wrote:
> Thank you!
> This configuration indeed resulted in the capability present.
> However, I still get the error:
> `zynqmp_firmware firmware:zynqmp-firmware: probe with driver zynqmp_firmware
> failed with error -22` and when I add prints I see that the SMC calls in the
> Linux kernel return -1.
> Anything else I need to add to the device tree to initialize it or something?
> When I boot into Ubuntu without L4 it works.
> Moshe
> ________________________________
> From: Adam Lackorzynski <a...@l4re.org>
> Sent: Monday, April 28, 2025 2:53 PM
> To: Moshe Kravchik <mkravc...@hotmail.com>; l4-hackers@os.inf.tu-dresden.de
> <l4-hackers@os.inf.tu-dresden.de>
> Subject: Re: Linux fails on startup looking for SMC
>
>
> On Mon Apr 28, 2025 at 05:25:34 +0000, Moshe Kravchik wrote:
> > Thanks a lot, Adam!
> > I added both and rebuilt the device tree, but now I'm getting:
> > ```
> > vm-1 | VMM[smccc_proxy]: smccc_proxy
> > vm-1 | VMM: smccc_proxy.l4vmm,smccc_cap: capability smc is invalid.
> > vm-1 | VMM[vm]: Device creation for virtual device smccc_proxy failed.
> > Disabling device.
> > ```
>
> This tells that the 'smc' cap is not there in uvmm. Is it there in the
> 'caps' table with which uvmm is started? There, where "ram = ..." is
> as well: caps = { ram = ...., smc = L4.Env.arm_smc, }, ....
> Additionally, in the microkernel, the CONFIG_ARM_SMC_USER option must
> also be enabled.
>
>
> Adam
>
> > Moshe
> > ________________________________
> > From: Adam Lackorzynski <a...@l4re.org>
> > Sent: Monday, April 28, 2025 12:07 AM
> > To: Moshe Kravchik <mkravc...@hotmail.com>; l4-hackers@os.inf.tu-dresden.de
> > <l4-hackers@os.inf.tu-dresden.de>
> > Subject: Re: Linux fails on startup looking for SMC
> >
> > Hi Moshe,
> >
> > On Sun Apr 27, 2025 at 15:32:53 +0000, Moshe Kravchik wrote:
> > > Hi,
> > > I'm trying to set up a Linux running on uvmm with a HW passthrough.
> > > I added `zynqmp_firmware` to my DTS (it was required for the device I'm
> > > trying to pass).
> > > However, Linux fails to add the device and I see:
> > > vm-1 | [ 1.772078] ledtrig-cpu: registered to indicate activity on CPUs
> > > vm-1 | VMM[guest]: No handler for SMC call: imm=0 a0=c200003f a1=3f
> > > ip=ffff800080026884 lr=ffff800080dcdb04
> > > vm-1 | VMM[guest]: No handler for SMC call: imm=0 a0=c2000001 a1=0
> > > ip=ffff800080026884 lr=ffff800080dcdb04
> > > vm-1 | [ 1.805957] zynqmp_firmware firmware:zynqmp-firmware: probe with
> > > driver zynqmp_firmware failed with error -22
> > >
> > > >From the traces I added, the failure is in `zynqmp_pm_get_api_version`.
> > >
> > > How do I add SMC handling?
> >
> > You give uvmm in the Ned script: smc = L4.Env.arm_smc
> >
> > And put this into you device tree:
> > smccc_proxy {
> > compatible = "l4vmm,smccc_proxy";
> > l4vmm,smccc_cap = "smc";
> > method = "smc";
> > };
> >
> > Note that L4.Env.arm_smc gives access to the real interface with all the
> > power that is behind it (the kernel only filters its range). So in a
> > longer run it might be necessary to have proxy for this interface, or
> > emulate the SMCs, or modify Linux to not use it, whatever fits best.
> >
> >
> >
> > Adam
Adam
--
Adam a...@os.inf.tu-dresden.de
Lackorzynski http://os.inf.tu-dresden.de/~adam/
_______________________________________________
l4-hackers mailing list -- l4-hackers@os.inf.tu-dresden.de
To unsubscribe send an email to l4-hackers-le...@os.inf.tu-dresden.de
