i forgot that the thread couldn't move if it were attached around the boards in the noches. but if you just used plain wood instead of notched and screwed in one of those cup hook or plant holder hooks on the top and bottom pieces of wood instead it would work. i hope that wouldn't pull the little heads off the bobbins.
--- susan <[EMAIL PROTECTED]> wrote: > i might hurt myself with the drill or get the string wrapped up in > it, > but i'm sure it would work great. > > there was a cheap method of tying one end of a loop of thread to a > chair, another end to the bobbin, then another loop tied to the top > of > the bobbin, spin it until it was wound tight, and tie the other end > of > the string to another chair, then let it go or start to pull at it to > make the string unwind. this idea was on the web site i got from > here > a year ago, or it was advice i got from one of the lacers. only > problem is chairs are too hard to drag around when you want to rewind > thread when you are not at home. > > i might be able to rig a portable one of those by using a 12 inch > flat > piece of 1 x 2 wood with a noch cut on each side in the middle. tie > one end of a loop onto the wood where the noches are, tie the other > end > to a bobbin, tie another loop on the top of the bobbin, spin it and > then tie the loop around another 12 inch piece of 1 x 1 wood with > noches cut on the sides near the middle, then pull. > > it should spin the bobbin around pretty well. i think that idea > would > be better and more portable. i would rather have less equipment to > carry with me anyways. > > i don't think i could find a hand drill very cheap in this area. i > think they are called augers, but i probably am wrong. > > thanks for the advice, and i will give you feed back on what mine > comes > out to look and work like. > > > > > --- Jenny Brandis <[EMAIL PROTECTED]> wrote: > > > Besides using your husband and kids, there is a cheap way of > winding > > your > > bobbins. (I can't seem to master the string method) > > > > Start with > > > > from the hardware store > > plastic tubing - 3 cm long x 6mm (1 1/2 inch long x 1/4 inch) > > plastic tubing - 5 cm long x 8mm (2 inch long x 5/16 inch) > > 1 x red 6mm plastic expanding plugs used in plaster walls to hold > > screws > > (1/4 inch) > > hand drill > > G clamp > > bulldog clip > > > > Instructions on making > > insert the red plug inside the 6mm tubing, leaving 1.5 cm (1/2 > inch) > > out > > insert above into the 8mm (5/16 inch) tubing, leaving the exposed > end > > of > > the red plug uncovered > > Insert the uncovered end of the red plug into the drill > > Using a sharp knife cut 2 slits the length of the tube(s) > > clamp the drill to the tabletop, with the turning handle upwards > > > > Instructions on winding > > Insert the bobbin inside the slit tube with the spangle going out > the > > slits > > and over the outside of the tube > > clamp top of split tube to bobbin to prevent it falling out or > > wobbling > > > > Tie on the thread, tension with one hand, turn the handle with the > > other > > until bobbin is full > > > > NB I would think the same technique would work with electric drill > > but I > > rather like the idea of being able to stop the turning quickly. > > > > Jenny Brandis > > Kununurra, Western Australia > > > > > > -- > > No virus found in this outgoing message. > > Checked by AVG Anti-Virus. > > Version: 7.0.323 / Virus Database: 267.8.9/39 - Release Date: > > 7/4/2005 > > > > - > > To unsubscribe send email to [EMAIL PROTECTED] containing the > > line: > > unsubscribe lace [EMAIL PROTECTED] For help, write to > > [EMAIL PROTECTED] > > > > > from susan in tennessee,u.s.a. > > > > ____________________________________________________ > Sell on Yahoo! Auctions no fees. Bid on great items. > http://auctions.yahoo.com/ > > To unsubscribe send email to [EMAIL PROTECTED] containing the > line: > unsubscribe lace-chat [EMAIL PROTECTED] For help, write to > [EMAIL PROTECTED] > from susan in tennessee,u.s.a. ____________________________________________________ Sell on Yahoo! Auctions no fees. Bid on great items. http://auctions.yahoo.com/ To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace-chat [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]
