I don't think it's a drop spindle. I've done a lot of spindle spinning and own many different models. Although some designers have experimented with more than one whorl, the spindles don't spin very well unless the weight is concentrated in one place. Also, there's no reason for placing a drop spindle on a spinning wheel, since a modern flyer wheel has a hollow spindle with an orifice and the only wheels that still use quill spindles spin "off the tip" of the spindle (this would be impossible if you have more than one whorl on your spindle).
My guess is that it's some kind of reel or spool and was part of a larger contraption, but not a spinning wheel. Best wishes, Avital > > From: "Jerry Camacho" <[EMAIL PROTECTED]> > Subject: [lace] Yet another item attributed to lacemaking on ebay > > I think this tool is a drop spindle for spinning. the flat round thingie's > are being stored on the spindle & can be removed for placement on the > spinning wheel.The biggest weight being at the bottom of course. I am > guessing, but it sure looks like a drop spindle, since I have one for > practicing, and it looks a lot like this one. > Cher in Papio > - - To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace [EMAIL PROTECTED]
