On Aug 3, 2004, at 12:59, Alice Howell wrote (in response to Jay):

The web site  http://www.cipka.sk/
The fan headside looks thicker than a twisted pair - possibly a plait?

Under my magnifying glass, it is really both. There is a twist in the middle between the pin sections. **However**, please note that the colored edge pair also makes the circle around the pin, so you have the continuous path of color along the outside edge.

I have a feeling that there are *two* edge (yellow) pairs, plaited between the pins, and surrounding the pin with twists (two or three above the pin, one below the pin). And that the worker pair (white) is taken in and let out from that plait either by a CTCTCTCT, or by a CTTC, but pinless (or else with a temporary pin under, not between, both pairs); it seems that the workers oin the edge in the valleys, not at the peaks of the fan. After which exchange, the original two edge pairs recommence plaiting.


Like Bev has said, plaiting at the edges is a common "trick" in Eastern European laces, and esp. the free-hand and peasant (coloured) ones; you can find it not only at the headside, but at the footside as well. It does strengthen the lace, and adds an extra dimension as well.

This last trip, I saw a lot of "two pair behaviour" I have never seen before. My favourite new "sightings" were plaits crossing plaits in little arcs (at the headside) creating a loose frill and - usually, but not always - at the footside (both the "loopy"kind and the straight kind), a funny little "dance" which goes like this:

You have two passive pairs at the edge. The worker goes through them, in cloth stitch, to the pin. The worker does what a worker normally does (either twists around the pin or trades places with the worker-in-waiting), then goes back through those passive pairs in clothstitch. While the worker is busy elsewhere, between the pins, the two passive pairs at the edge either: CTCT, or: TCTCT. When the worker comes back towards the pin, they're back to being ordinary passives - mild as milk, butter wouldn't melt... :) The worker itself can be - but doesn't have to be - twsted before and after the passage through the passives.

I absolutely *adore* the effect, and have been happily using a scaled-down version of it (don't twist the - single - passive edge pair at the pin, but do twist it between pins) in my latest project (from Cathy Belleville's "Chrysanthemum Lace" book), at the headside edge. Where it really looks delicious is at the turns, done in clothstitch and with a pivot pin at the centre. Ordinarily, you worry about the passivess pulling towards the centre and away from the headside, and spend a lot of effort tensioning them "just so" in order to make them stay close to the headside pins. But here, when the other passives get tensioned too hard and drift towards the centre, it only heightens the lacy efect (I do not twist the worker before she encounters the last passive, BTW)... Yummy :)

---
Tamara P Duvall             http://lorien.emufarm.org/~tpd
Lexington, Virginia, USA     (Formerly of Warsaw, Poland)
              Healthy US through The No-CARB Diet:
    no C-heney, no A-shcroft, no R-umsfeld, no B-ush.

-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to
[EMAIL PROTECTED]

Reply via email to