Hello Dee, After making the picot and making the first CTC, try pulling from one bobbin, then from the other... and you will see what happens. When you pull the correct one the little hole disappears, but when you pull the wrong one, the hole appears. So, it is a matter of tensioning, and you get this with practice. But first try to understand from what bobbin you have to pull to close the hole.
Plaits look easy to make, but tension is very important to get a good looking plait (straight, and not twisted): the four bobbins have to be at the same length so that you can pull from the four of them with the same strength. Hope this explanation can help you.. Greetings from Antje, in Guadalajara, Spain. - To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]