I agree with Brenda, this item is not for 'drawing' wire but might be for sizing although very limited. My wire 'gauge' (used to determine the size) has about 3-4 dozen holes from very fine to pencil size.
Lorri (formerly a custom fine jeweler) Subject: Re: [lace] eBay 120365023152? French "object" (tool) I've done a few jewellery classes and have drawn wire by hand. Even very thin wire very definitely has to be clamped at one end and clasped tightly with pliars at the other end on order to pull it through the holes and it's quite a physical effort. Gravesend Adult Ed Centre has a very well equipped jewellery workshop. For wire drawing a heavy metal plate with holes in (rather like a very heavy knitting needle gauge) is clamped at one end of the apparatus. The wire is filed to a point to push a few mm through the required hole, grasped with very heavy pliars and pulled through to narrow and elongate it. There is no way the little contraption on ebay could be used for wire drawing! I think it may be for positioning threads in embroidery - or even for crimping pastry but not wire drawing! Brenda On 27 Jan 2009, at 05:25, Avital wrote: > So my guess was right (and if I'd been paying attention, I would have > seen the French and translated it but I've had a cold for a couple > days). It's a tool for drawing wire. Wire is made by hammering a piece > of metal into thinner and thinner (and longer) pieces. The final wire > is formed by drawing it through a gauge with pre-formed holes (we're > talking about wire-making by hand). I wasn't sure about it because > most of the wire-drawing tools I've seen had handles that enabled you > to clamp them to a work bench because you want the gauge to be fairly > stable so that you can draw the wire through with a pair of pliers. If > the metal were very soft, I guess you could use a hand-held > wire-drawer like this. > > Here's an article explaining the process: > http://en.wikipedia.org/wiki/Wire_drawing<http://en.wikipedia.org/wiki/Wire_d rawing> > > Most wire-making is done by machine these days but there are jewelers > who do wire-drawing by hand. Arlene Fisch describes the process and > tools in her book, "Textile Techniques in Metal." (Great book. Pity it > appears to be out of print at the moment.) > > Avital > > > On Tue, Jan 27, 2009 at 12:00 AM, Susan Reishus > <[email protected]<mailto:[email protected]>> wrote: >> The online translation is for the ebay item is: >> >> "Draw wire Handle in oak Very beautiful general presentation" >> >> So must be something for wire to place while working with it. >> Conceptually reminds me of a French knitter so one can work in a >> tube. The openings seem disturbingly harsh for threads, imho. I >> agree that often listers can unknowingly misrepresent items. >> >> Best, >> Susan > > - > To unsubscribe send email to [email protected]<mailto:[email protected]> containing the line: > unsubscribe lace [email protected]<mailto:[email protected]>. For help, write to > [email protected]<mailto:[email protected]> > > Brenda in Allhallows, Kent http://paternoster.orpheusweb.co.uk/index.html<http://paternoster.orpheuswe b.co.uk/index.html> - To unsubscribe send email to [email protected]<mailto:[email protected]> containing the line: unsubscribe lace [email protected]<mailto:[email protected]>. For help, write to [email protected]<mailto:[email protected]> - To unsubscribe send email to [email protected] containing the line: unsubscribe lace [email protected]. For help, write to [email protected]
