The book Laces from the Collections of the Jewish Museum in Prague has a
chapter on Spanier Arbit, called Shpanyer Arbet in this book. Actually the
description in this book sounds more like what is being described by
Gabrielle.

"The basis comprised two inner bundles of cotton, linen or silk fibres  of
various thicknesses and a pair of thin external cotton threads." p. 93.
There  is a also a diagram that shows something like what Gabrielle is
describing and  not like what one can see being done at the Israel Museum. I
have
seen pictures  like the one at the Israel Museum before, and metallic lace
which resembles it.  Therefore, I am wondering if the term Spanier Arbit may
be
applied to metallic decorative material rather broadly, even two
techniques that are rather dissimilar. The term Point d'Espagne seems to have
been
used quite broadly in lace whenever a metallic thread was used. I find the
similarity in terms. Spanier Arbit and Point d'Espagne intriguing.

According to the book from the Jewish Museum, Shpanyer  Arbet reached a
peak in 1860-90 when there were thought to be almost 200  people making it.
(!)

According to the book, "The available sources on the origin and history of
the shpanyer arbet technique demonstrate that it first appeared in Sasow
(eastern Galicia which is now Sasiv, Ukraine) c. 1830, which, to date, is its
 only known production center.  It was introduced to this place by
Mordekhai  Leib Margulies of Berdichev. Ukraine, after he had evaded
conscription
into the  Russian army."

The photography of examples in this book shows more variety in textural
effect than in the example in the pdf. There are also areas where the worker
worked up and back to make something called a "fish scale"

The relationship between Spanier Arbit and bobbin lace, and what actually
is legitimately called Spanier arbit is something that needs to be studied
and  written about by someone knowledgeable in both bobbin lace technique and
Jewish  tradition. (I nominate Avital :-))

Devon


In a message dated 2/14/2011 10:29:37 A.M. Eastern Standard Time,
[email protected] writes:

Gabrielle,

I think the source of the confusion is that we're  talking about two
different techniques, both called Spanier arbeit. If you  look at my
photos of the machine with a work in progress, you will see that  it is
very different from the German PDF. I translated parts of the PDF  and
examined the photos quite carefully to compare them. The machine  that
I saw actually weaves a thin metallic ribbon over and under 4  cords.
The Austrian version that you refer to uses a much wider  metallic
ribbon or wire and coils it around two supporting  cords.

The Austrian version looks quite fragile and is more suitable  for the
women's elaborate head-dresses in the photos. The Jewish examples  in
the Israel Museum use a braid form along the collar of a prayer  shawl.
This part of the tallit must be very durable because it is  constantly
being folded and shaken out and handled. It would also have to  be
quite flexible because it drapes around the neck. You couldn't do  that
with the version of Spanier arbeit that is used for the  German
head-dresses.

Best wishes,

Avital

On Mon, Feb  14, 2011 at 9:40 AM,  [email protected]
<[email protected]> wrote:
>  Spanier Arbeit has not much to do with bobbin lace. I’ll try to  explain
> (having learned it some 15 or so years ago), but give you as  well a link
> to a pdf where you will find good fotos.
> You work  on a bolster pillow on a tape lace-like pattern. While working,
> two  ticker cotton threads follow the outline of the tape. A flat wire is
>  wound around both cotton threads and fixed with one metallic thread on
>  each side. You simply turn two or four times on each side, then wound
>  again the flat metal wire around both.
>
> Here is the  link:
>  http://members.aon.at/rosamichl/Anleitung_Lam_technik.pdf
> The homepage  to it is:
> http://members.aon.at/rosamichl/page_1_1.html
> You  will see that this kind of work was/is used for traditional hats in
>  southern Germany and Swizzerland.
> Mrs Selb explains, that the  technique was a  well kept secret. There was
> only one woman in  her area who was able to make it. She took about 360
> hours for one  cap.
>
> Gabriele

-
To unsubscribe send email to  [email protected] containing the line:
unsubscribe lace  [email protected]. For help, write to
[email protected]. Photo  site:
http://community.webshots.com/user/arachne2003

-
To unsubscribe send email to [email protected] containing the line:
unsubscribe lace [email protected]. For help, write to
[email protected]. Photo site:
http://community.webshots.com/user/arachne2003

Reply via email to