The instructions I have for this tablecloth say to work the first strip
as long as you need, and then take it off the pillow. Work the second
strip until it is *nearly* as long as you need, and then carefully join
at the pinholes of the two strips. You will then work the second strip
until it is exactly as long as the first, judging from the pinholes.
Take these two strips off the pillow. This procedure is repeated until
the tablecloth is as wide as you want it to be.
Clay
On 5/26/2011 1:02 PM, [email protected] wrote:
I have seen that picture. It's lovely.
One of my concerns with making separate strips to connect later would be
consistency in length of strips. Of course, some easing can be done to adjust
small differences, but the cloth would be smoother if matched pinhole to
pinhole. For a solid lace-strip tablecloth, attaching as you go would assure
the lengths match and are mated smoothly.
-
To unsubscribe send email to [email protected] containing the line:
unsubscribe lace [email protected]. For help, write to
[email protected]. Photo site:
http://community.webshots.com/user/arachne2003
