Hi Ruth,
I made the scarf last year and I made it the full width of the
pattern. I 
converted a block pillow by turning it sideways and made a roller
for the center 
section so I had a pillow wide enough to work it and room for
all the bobbins.  

I was afraid I would not have enough thread on the three
different color spools 
of silk thread, so I decided to do it all in one, but
there was plenty.  You can 
see the finished result on my photo page on Flickr
(link at bottom of Arachne 
emails). I don't remember having much of a problem
with the hitch, but I used 
bobbins with a thistle style head and put the
hitch on that area.  I had 
problems with tensioning because of the slubs on
the thread but I got used to 
tensioning as I went, rather than waiting until
I reached the end of a section. 
 I also used a metallic thread to join the
sections together.  This I would not 
do again as it feels scratchy on bare
flesh.  In the photo you can see the 
tassels which were made from bobbin
thread.  They annoyed me with the curling 
and I felt they looked a bit wimpy.
I got rid of them and using the pattern, 
made two sections that were straight
on one side and had the curved pattern on 
the other side.  I then sewed them
on to each end of the scarf. I enjoyed making 
the scarf.  It was a challenge
even though it is basically a simple Torchon 
design.  You have to watch where
the workers change place to change the areas of 
color.  I seem to remember it
was in an area of the pattern that was hard to 
see.

Janice 


>I am
interested in corresponding with gentle spiders who have used Yaspé silk
thread.  This thread has many, many slubs and these slubs are quite large and
long.  I am about to start a Christine Mirecki scarf pattern.  Curious spiders
can see the pattern at her website http://www.mirecki.net/ .  Then go to
Patterns, Scarfs and Shawls and the name of the pattern is “Schal
Lena�.>
 Janice Blair
Crystal Lake, 50 miles northwest of Chicago,
Illinois, USA
www.jblace.com
http://www.lacemakersofillinois.org

-
To unsubscribe send email to [email protected] containing the line:
unsubscribe lace [email protected]. For help, write to
[email protected]. Photo site:
http://www.flickr.com/photos/lacemaker/sets/

Reply via email to