<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
<< Lancair Builders' Mail List >>
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Steve:
"IO" means injected/opposed. "O" means carbureted/opposed (ie. not injected).
360 is the displacement. Suffixes: A, C and D suffixes (with respect to IO
-360 only) are canted-valve "200 HP" engines with bigger fin area on heads
and about 3/4" wider than the straight valve (nominally) 180 HP versions (B
and E). (O-360's have different suffix designations which I don't have
memorized; don't deal with carbureted engines that much.)
"A"'s have the Bendix injector servo mounted on the front of the sump/plenum;
"C"'s have it mounted on the rear. I forget what is unique about the "D"'s (I
think they're helicopter engines; can research it later if needed). The next
digit and letter in the suffix (like "1E" in B1E) identify accessory case and
configuration differences. If there's a 4th digit (as in C1C6) it signifies
the engine has the internally counterweighted crankshaft for absorption of
torsional excitation. "6" (as in IO-360-C1C6) means it has a 6th and 8th
order couterweight. "5" (like on an IO-540-K1A5) means 5th and 8th order. If
it has a 5th letter ("D") it means the engine has one of those stupid dual
magnetos (as in IO-360-A1B6D). BTW, I have NEVER had an unmodified "200 HP"
Lyc on my dyno that actually produced 200 HP (SAE, corrected to 59�F, 29.92
in. hg.). You might ask this guy in NY just how he determined 205 HP out of
his B1E. (220 is do-able at 2700 on a straight-valve engine, but with lots of
changes and skill. Lots of these claims are wet-thumb estimates based on
wishful thinking.
Jack Kane
EPI, Inc.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website: http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore: http://www.buildersbooks.com/lancair
Please send your photos and drawings to [EMAIL PROTECTED]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
