<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
<< Lancair Builders' Mail List >>
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Posted for [EMAIL PROTECTED]:
Matt
If I remember correctly, the trimpot for the MAC trim servos can be
adjusted down to practically no travel. I am puzzled by the lack of this
adjustment on your system.
I agree with Orin and Marv. Make the hinge longer and then decrease the
size of the tab.
If, after making these changes, no improvement is noted, I would look for
other causes. Does it go supersensitive in one direction only? If so, I
would check the wing incidence to the incidence of the fuselage to make
sure there is no error there. Supersensitivity in one direction might mean
you are at the edge of the envelope in some parameter.
The MAC servos on my LIV were way over-powered. I had to put their
trimpots on all servos to make slow, stable changes in trim.
David Jones
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website: http://www.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore: http://www.buildersbooks.com/lancair
Please send your photos and drawings to [EMAIL PROTECTED]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
