sorry, i pasted the wrong output in my earlier message. Trying to get the ath
driver to work on the Presario C751NR. Here's the correct prtconf info:
Node 0x000015
assigned-addresses:
83010010.00000000.51300000.00000000.00010000
reg:
00010000.00000000.00000000.00000000.00000000.03010010.00000000.00000000.00000000.00010000
compatible: 'pciex168c,1c.103c.137a.1' +
'pciex168c,1c.103c.137a' + 'pciex168c,1c.1' + 'pciex168c,1c' +
'pciexclass,020000' + 'pciexclass,0200' + 'pci168c,1c.103c.137a.1' +
'pci168c,1c.103c.137a' + 'pci103c,137a' + 'pci168c,1c.1' + 'pci168c,1c' +
'pciclass,020000' + 'pciclass,0200'
model: 'Ethernet controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 0000103c
subsystem-id: 0000137a
unit-address: '0'
class-code: 00020000
revision-id: 00000001
vendor-id: 0000168c
device-id: 0000001c
pcie-capid-pointer: 00000060
pcie-capid-reg: 00000011
name: 'pci103c,137a'
devfsadm reports that ath is loaded but failed to attach. Suggestions?
Thanks,
Julian Hill
This message posted from opensolaris.org
