Hi,
Im trying to play abit with the Linksys cardbus wifi
card I have got. My card was plumbed ok and
I have tried to remove the cardbus from the laptop.
Got the following messages:
Dec 2 11:06:48 nereid cardbus: [ID 307021
kern.notice] NOTICE: Device [0x0] function [0] is busy
Dec 2 11:06:48 nereid cardbus: [ID 564440
kern.notice] NOTICE: cardbus_unconfigure_node:
cardbus_unconfigure failed
Dec 2 11:06:48 nereid cardbus: [ID 435575
kern.warning] WARNING: cardbus_unload_cardbus:
cardbus_unconfigure_node failed
Dec 2 11:06:48 nereid cardbus: [ID 527677
kern.warning] WARNING: cardbus(pciclass,0607000):
Failed to remove device tree: Slot disabled
Then I tried to insert back the card. The ath0 was
plumbed so I had to unplumb the card and try again.
Got however an I/O error:
# ifconfig -a
lo0:
flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL>
mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
iprb0:
flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4>
mtu 1500 index 2
inet 172.21.175.35 netmask fffffe00 broadcast
172.21.175.255
ether 0:d0:59:cb:e:92
ath0: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4>
mtu 1500 index 3
inet 0.0.0.0 netmask 0
ether 0:12:17:78:f2:de
# ifconfig ath0 unplumb
#
# ifconfig -a
lo0:
flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL>
mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
iprb0:
flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4>
mtu 1500 index 2
inet 172.21.175.35 netmask fffffe00 broadcast
172.21.175.255
ether 0:d0:59:cb:e:92
#
#
#
#
# ifconfig ath0 plumb
ifconfig: plumb: ath0: I/O error
So any ideas if this is supported under snv_b27a ?
Thanks,
Stefan Parvu
Blog: http://stefanparvu.blogspot.com
