If 'scan' doesn't work,it's likely to be an interrupt routing issue. What is the output of the following command? # echo '::interrupts' | mdb -k
(It shows the interrupt map of the system) Vincent. Stuart F. Biggar wrote: >The radio does not scan: > > >[a21p:/]# ifconfig ath1 plumb >[a21p:/]# wificonfig -i ath1 scan >essid bssid type encryption signallevel >[a21p:/]# ifconfig -a >lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 >index 1 > inet 127.0.0.1 netmask ff000000 >ath1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 > inet 0.0.0.0 netmask 0 > ether 0:20:e0:37:28:49 >[a21p:/]# >[a21p:/etc]# cat release > Solaris Nevada snv_28 X86 > Copyright 2005 Sun Microsystems, Inc. All Rights Reserved. > Use is subject to license terms. > Assembled 28 November 2005 > >I've attached a file that has messages from the latest boot with cardbus >debug set to 1 in /etc/system: > >set pcic:pcic_debug=1 >set cardbus:cardbus_debug=1 > >I'll try the new cardbus driver in the T43p with the modem later >this weekend. > >Thanks, > >Stuart >This message posted from opensolaris.org > > >------------------------------------------------------------------------ > >_______________________________________________ >laptop-discuss mailing list >laptop-discuss at opensolaris.org > >
