Hi,
I am using SXCE b99 and I tried to attach sdhost to my driver. My hardware:
<excerpt cmd="/usr/X11/bin/scanpci">
pci bus 0x0008 cardnum 0x03 function 0x02: vendor 0x104c device 0x803b
Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
</excerpt>
<excerpt cmd="prtconf -pv">
Node 0x00001e
assigned-addresses:
82081a10.00000000.dc004000.00000000.00001000
reg:
00081a00.00000000.00000000.00000000.00000000.02081a10.00000000.00000000.00000000.00001000
compatible: 'pci104c,803b.104d.8212.0' +
'pci104c,803b.104d.8212' + 'pci104d,8212' + 'pci104c,803b.0' + 'pci104c,803b' +
'pciclass,018000' + 'pciclass,0180'
model: 'Mass storage controller'
power-consumption: 00000001.00000001
devsel-speed: 00000001
interrupts: 00000003
max-latency: 00000004
min-grant: 00000007
subsystem-vendor-id: 0000104d
subsystem-id: 00008212
unit-address: '3,2'
class-code: 00018000
revision-id: 00000000
vendor-id: 0000104c
device-id: 0000803b
name: 'pci104d,8212'
</excerpt>
I tried to be smart and did:
update_drv -a -i '"pci104c,803b"' sdhost
I got the following reply:
devfsadm: driver failed to attach: sdhost
Warning: Driver (sdhost) successfully added to system but failed to attach
In /var/adm/messages there was the following:
Oct 29 13:43:35 zoetekauwer sdhost: [ID 477125 kern.warning] WARNING: Unable to
determine clock frequencies
Oct 29 13:43:35 zoetekauwer sdhost: [ID 852830 kern.warning] WARNING: Failed
initializing slot 0
Any help appreciated. Testing help offered.
Cheers,
Douglas
--
This message posted from opensolaris.org
