Peter Kehl wrote: >Hi, > >I've got a zd1211 usb wifi device and Solaris Express Developer Edition (SXDE) >09/2007 on AMD64. So I've got ZYD 0.1 driver. Since my 'uname -a' says SXDE >09/07 is based on snv build 70, I've got on-src.tar from >http://dlc.sun.com/osol/on/downloads/b70 and I set it as ONNV GATE in ZYD >Makefile. I've installed libiconv-1.11 and gcc-3.4.6 from www.sunfreeware.com. > >When under zyd-0.1/src I run 'gmake all' with ISA=amd64 then it says it >doesn't support 64bit. > Odds, I did this successfully, my on-src is b69.
> So I've set ISA=i386. Then it generated about a page or two of warnings, both > under zyd src and ONNV. I've removed -Werror and then it compiled ok. I run > 'gmake install' as root. Then I rebooted in 32bit mode. > > I also built successfully in 32-bit with no warnings. >Now when I run >add_drv -n -i '"usb586,3409"' zyd >then it says: >System configuration files modified but zyd driver not loaded or attached. > >I've got ZyXel AG-225H device and according to >http://linuxwireless.org/en/users/Drivers/zd1211rw/devices it uses same >chipset. Its vendor/product codes are 0586 and 3409. It shows as such when I >run prtpicl -v > > Yes, this should be supported by zyd driver, since its chipset is zd1211. >Please advise. If I need to use current ONNV from Mercurial - do I need to >update/rebuild my kernel as well? > > I think you don't need to do that, b70 should work. -- Quaker
