Q1: -on phys. iface it will work but will be hard to filter.
..... 1 VLAN ~ 1 IP segment , in this case I can filter according to dest.
IP addres on internal iface (I hope)...........
-i've been told by one user that it works with virtual vlan ifaces
Thanks
Lumir Unzeitig
-----Original Message-----
From: Martin Devera [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 06, 2002 11:23 AM
To: Lumir Unzeitig
Cc: [EMAIL PROTECTED]
Subject: Re: [LARTC] HTB on VLAN interfaces
Q1: -on phys, iface it will work but will be hard to filter.
-i've been told by one user that it works with virtual vlan ifaces
but because you want to share between these interfaces you will want
to use physical one and use iptables to define classes (or u32 filter
and match vlan-id directly)
Q2: in my tests I validate HTB from 1kbit/s succesfully.
devik
On Mon, 6 May 2002, Lumir Unzeitig wrote:
> Hi,
> does anybody have experience with traffic control on VLAN interfaces?
> I 'd like to share a link from ISP to 8 VLAN segments (= 8 virt.
> interfaces-vlan000x are binded to 1 physical -eth0 ).
>
> Q1:
> Shall I define the classes on the physical or the virtual interfaces?
>
> Q2:
> Can a 64kbits bandwidth from ISP be successfully controled to 8 subjects
> (minimal assured bw=8kbits) ? (=relatively small bw divided to much
smaller
> parts).
>
>
>
> Thanks
>
>
> Lumir Unzeitig
>
> _______________________________________________
> LARTC mailing list / [EMAIL PROTECTED]
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
>
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
