On Tuesday 21 May 2002 03:31, hanhbnetfilter wrote:
> ingress can be used to control the incoming packet,
> such as:
> tc qdisc add dev eth0 handle ffff: ingress
> tc filter add dev eth0 parent ffff: protocol ip prio 5
> u32 match ip src 172.16.1.11 police rate 10kbit burst
> 10k drop flowid :1
> tc filter add dev eth0 parent ffff: protocol ip prio 5
>
> u32 match ip src 172.16.1.22 police rate 10kbit burst
> 10k drop flowid :2
> first ,I do not sure these method can use class(could
> it do? I tested it can not do). if it can do it
> ,please give me a example.
Ingress qdisc is classless.
> second, rate can not be shared, if i want to control
> the incoming packet rate not throug egress qdisc, and
> the rate can be shared, please tell me how can i do.
You can use use the imq device. You can redirect packets (incoming and
outgoing) to this device. And you can attach CBQ or HTB to this device. A
link can be found on www.docum.org under faq.
Stef
--
[EMAIL PROTECTED]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
