Hello
I made a set of CBQ rules using the cbq.init script, but i got one aliased
interface eth1:0 that is the gateway for a machine in a subnet...
I put a rule for this machine in the eth1 but seems that CBQ isn't limiting
the traffic for it, and in the config files I can't put eth1:0 as the
interface...
note that there's a route to all traffic going to the especific IP to pass
for the eth1:0 interface.
sniffing the eth1:0 with tcpdump i can see packages going from the net to
the IP, and sniffing the eth0 i can see the packets coming. I manage to
limite the outgoing traffic putting the rule in eth0, but the traffic
incoming to the IP no, because it's exiting by a aliased interface.
There's a solution for it?
[]s
coredump
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
