Hi,
Hopefully this won't be too off-topic (I've seen both bonding & vlan
mentioned on the list, but not really together).
I've tried to get bonding (2 x 100Mb EEPro, but will want to try on
1000BaseT) and vlans to work together, but without luck. I can get them
working fine (seemingly at least - I didn't tried bursting on the
bonded port) individually. However, when I bond the ports together and
then run vlans on top, it doesn't seem to work (although there are
no errors when configuring the interfaces).
FWIW, this is:
* RedHat 7.3 ("customised" RH73 kernel - 2.4.18)
* Intel EEPro 100Mb dual-port NIC
* Extreme Summit4 switch.
Any suggestions gratefully accepted.
Ivan
--
Ivan Beveridge <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
