> After you apply the patches the Linux machine will need to be running NAT in some manor. > Because I have routers on each of my DSL lines I perform two > rounds of NAT or PAT. One in each router, and then again in the Linux router. > In doing the NAT/PAT you will need to give the outgoing interface each of the > IP's that your routers will be translating to.
Have that up and running alrady ... :-) > You will also want to dial in your DNS to servers for each IP block, > and load balance that as well. What do you mean by that? Hope that the patches work when I get my hands on them :-) Regards, Niels _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
