I want to shape the traffic on the http port and further on shape it if the
destination ip is on some network I specify
however, only the first rule is applied ... why ?
#http
$filtru prio 1 u32 match ip sport 80 0xffff flowid 1:11
#droop :-)
$filtru prio 1 u32 match ip src x.x.x.x \
match ip dst x.x.x.0/24 flowid 1:13
where classes are defined earlier as
$tc class add dev eth0 parent 1:1 classid 1:10 \
htb rate 32kbit ceil 32kbit
$tc class add dev eth0 parent 1:1 classid 1:11 \
htb rate 64kbit ceil 64kbit
$tc class add dev eth0 parent 1:1 classid 1:12 \
htb rate 128kbit ceil 160kbit
$tc class add dev eth0 parent 1:1 classid 1:13 \
htb rate 100kbit ceil 100kbit
and
filtru="$tc filter add dev eth0 protocol ip \
parent 1:0"
thanks in advance,
petre
--
6:39pm up 6:21, 1 user, load average: 0.06, 0.10, 0.06
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
