Hello, I hope i wont make it too complicated and sorry for my englihs...
The company has multiple connections to the internet ADSL + CABLE + XDSL... and i only want to use two for load balancing for now. I have read the HOWTO and i got it up and working it works great but i still have a few questions if anyone could help! the setup is: ADSL on ETH0 and CABLE on ETH1 When i load balance on ADSL + CABLE i want to load balance only lets say FTP, WEB, SMTP and some other ports BUT NOT ssh, telnet and such applications. I want to have ssh and telnet outgoing connections only on my ADSL route. how can i do that? any ideas? and another thing... i was wondering if there is a patch or command or somthing that could check if lets say CABLE line is used more then 80% and ADSL is used less then 10% that the next connection would be made on ADSL? And the last one... about the route cache can i reduce the timeout in chache from default 60s i think to lets say 1 and that when new connections are made they are more frequently reorganized over the load balance? thank you David _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
