Marco,
: ip ro add 0/0 dev eth2 table s-dsl
: ip ro add 0/0 dev ppp0 table a-dsl
You need to specify a default gateway here, or else you are telling your
box to route 0/0 directly out the interface--which means it will arp for
every address on the Internet on your local ethernet!
ip route add 0/0 via x.x.x.x table s-dsl
ip route add 0/0 via x.x.x.x table a-dsl
should do it. You can use the "dev $DEVNAME" if you wish.
: The maqerading is also setup:
: ipchains -A forward -s 192.168.0.0/24 -j MASQ
: How can i test, if the packtes get marked?
Look at the verbose ipchains output ("ipchains -nvL forward") output to
see if the usage counter on the particular chain increments.
-Martin
--
Martin A. Brown --- SecurePipe, Inc. --- [EMAIL PROTECTED]
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
