On Thu, 17 Oct 2002, Nickola Kolev wrote:
> On Thu, 17 Oct 2002 00:33:05 +0200 (CEST)
> Walter Haidinger <[EMAIL PROTECTED]> wrote:
>
> [ cut ]
> > tc qdisc add dev eth1 root handle 1: htb default 20
> > tc class add dev eth1 parent 1: classid 1:1 htb rate 64kbit ceil 64kbit burst 5k
> > tc class add dev eth1 parent 1:1 classid 1:10 htb rate 64kbit ceil 64kbit burst 5k
> > tc class add dev eth1 parent 1:1 classid 1:20 htb rate 57kbit ceil 64kbit burst 5k
> > tc class add dev eth1 parent 1:1 classid 1:30 htb rate 51kbit ceil 64kbit burst 5k
> > tc class add dev eth1 parent 1:1 classid 1:40 htb rate 6kbit burst 0
> > tc qdisc add dev eth1 parent 1:10 handle 10: sfq perturb 10
> > tc qdisc add dev eth1 parent 1:20 handle 20: sfq perturb 10
> > tc qdisc add dev eth1 parent 1:30 handle 30: sfq perturb 10
> > tc qdisc add dev eth1 parent 1:40 handle 40: sfq perturb 10
> >
> [ cut ]
>
> Can you give us the exact commands you issued? F.e. what are the filters?
Above are all commands issued. I have no filters attached because
bandwidth limiting does not even work for the default class, i.e.
unclassified traffic. I had filters assigned to the root class 1: like the
one below in an attempt to catch all packets.
tc filter add dev eth1 parent 1: protocol ip \
prio 20 u32 match ip dst 0.0.0.0/0 flowid 1:20
Didn't make any difference, though.
Walter
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
