>>
>> WHEN i send packets from 10.1.1.1 at rate frome 12mbit to 50mbit BY
>> using
>> SMARTBIT 600, the rate of class 10:100 is always 12Mbits.
>>
>> >I suppose it's the SMATRBIT 600 that says it sends 12bits.
>> >WHAT if you change 12mbit to 15mbit. WHAT if you send more then
20Mbit.
>>
>> WHAT
>>
>> >if you change 12mbit to a lower value (1mbit).
>> >CAN you can do that and post the results?
>> >I don't think there is an error in your setup.
>>
>> WHEN i change 12mbit to 15mbit and send packets at rate
>> 15mbit,20mbit,30mbit,50mbit, the rate of class 10:100 is always 15mbits.
>> WHEN i change 12mbit to 30mbit and send packets at rate
>> 30mbit,40mbit,50mbit, the rate of class 10:100 is always 30mbits.
>> WHEN i change 12mbit to a lower value (1mbit) and send packets at rate
>> 1mbit,2mbit,10mbit,20mbit, the rate of class 10:100 is always 1mbits.
>The ceil parameter always worked for me. What version of tc/htb/kernel
are
>you using?
TC from htb3.6-020525.zip
kernel 2.2.21 and patch ds9-2.2.21-2.diff rbtree-2.2.21-1.diff
ds9-htb3-2.2.21-1.diff
from http://www.ssi.bg/~ja/ds9/
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
