On Wednesday 13 November 2002 20:58, Christian G. Warden wrote:
> On Wed, Nov 13, 2002 at 07:25:52PM +0100, Stef Coene wrote:
> > If you want to improve latency for certain traffic, you can create 2 htb
> > classes. One with a lower prio parameter to get low latency and an other
> > class with all other traffic.
> > To give each pc on the network the same opportunity to send something,
> > create 100 sub classes with parent=second class. To get fairness / pc,
> > you can add a sfq to each class. You can do the same for the low prio
> > class. If you don't care about fairness / pc, you can add 1 esfq qdisc
> > instead of the 100 sub classes.
>
> can you add filters both the parent classes and sub classes so that you
> put packets into the sub classes by ip address and then into the parent
> classes by port, packet size, tos, etc.?
You can add filters to the root qdisc or a class. When a filter place a
packet in a class, the filters of that class are checked for a match. So you
can "stack" filters.
Stef
--
[EMAIL PROTECTED]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
