thanks :) but what if i setup color-aware filters for AF PHB? say, there is two filters , both have to match the packets from the source ip 10.0.0.1/24 to the destination 10.0.1.1/24 , and at same time, the first one with a police rate and a burst size and a continue option, while the second one with a relatively lower priority which will match the packets excess the police rate. thus, the iptables cannot tell me the two colored-counters value respectively, it can only tell me the total packets matched by the two filters , am i right?
From: Stef Coene <[EMAIL PROTECTED]>
To: "Folke Aeon" <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
Subject: Re: [LARTC] a question about tc filter
Date: Sun, 1 Dec 2002 10:58:50 +0100
On Sunday 01 December 2002 08:18, Folke Aeon wrote:
> hi, all
>
> i run the following scripts :
> tc qdisc add dev eth0 handle ffff: ingress
> tc filter add dev eth0 parent ffff: protocol ip \
> pref 4 u32 match ip dst 10.0.0.1 flowid :1
>
> my question is :
>
> can i know how many packets are matched by
> this filter?
No
> if i can , what should i do to get this
> counter value, then.
But you can make a iptables rule that matches the same packets. Iptables has
builtin counters for bytes and packets.
Stef
--
[EMAIL PROTECTED]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_________________________________________________________________
Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
