On Mon, 02 Dec 2002 22:30:10 +0100 Anton Tinchev <[EMAIL PROTECTED]> wrote:
> Hi, > first i wonna thank you for the great work. > I have few slack boxes with several 3com cards that acts as routers. > Some of them has 50+ vlans, 100 000+ routing entries, full BGP (zebra) with 10+ peers > and routes 50-70 mb/s traffic. Everithing is rock solid, few months uptimes. Sounds pretty impressive, really. I admire such setups. > I wona to upgrade some of my cards and need advice what to use. > On 100+mb/s interrups killing my boxes - 20 000+/s (yes, coalescing, i know:)) > What to use? tigon2 or tigon3 for gigabit? (3c985 or 3c996) None of them! Or at least not tigon3! I've tried to use one (3c996-T), and I experienced strange system lockups. The board is a dual Tyan Tiger MP with couple of Athlon MP 1600+. It was just hanging from time to time with completely no output of any kind. Just rock solid lockup. :/ Anyway, I changed to a good old 3c905C and now I don't have any problems. Well, I'm serving at half of your rate, but anyway. So, I would suggest using HP equipment. At least I've heard that it works quote well. -- _____________________________________________________________ With kind regards, Nickola
msg03189/pgp00000.pgp
Description: PGP signature
