On Wednesday 18 December 2002 13:23, Mindaugas Riauba wrote:
> I'm trying to setup traffic shaping for a customer.
> Machine is RedHat 7.3 with kernel-smp-2.4.18-18.7.x.
> HZ=512.
>
> But when I try to load link (using netcat and discard /
> chargen services) bytes count (tc -s qdisc show, sfq qdisc)
> goes quite well over 512kbit (~560kbit). With UDP I can
> even go over 1mbit.
I did the same. I used ttcp and recorded the bandwidth I could use. But my
results where nearly perfetc (I recorder the bandwidth on a very log period).
Recently I tried it with upd data but I had some strange results. 1 UDP data
stream was shaped perfectly, but 2 UPD data streams can use the full link
bandwidth. I still have to test ir further.
Stef
--
[EMAIL PROTECTED]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
