On Friday 20 December 2002 03:31, Miguel Figueiredo wrote:
> Em Qui, 2002-12-19 �s 10:06, Nestor S A Melo escreveu:
>
> Nestor,
>
> First: If my english is poor, you can contact me direct by email in
> portuguese since I`m Brazilian too :)
>
> So, somebody correct me if I`m wrong ( Stef? ):
>
> 1 - I think you share more bandwidth than you have allocated.
That's no problem. Rate of class 1:10 and 1:20 = 26+220=246kbit and rate of
parent class is 256kbit.
> 2 - In sfq directive, you should write:
> #tc qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10
His command will work too.
> 3 - You've marked packets with iptables -t mangle, but you're using u32
> instead fw.I'm not sure if you did the correct u32 configuration too.
>
> Probably you must use:
>
> #tc filter add dev eth0 parent 1: protocol ip prio 100 handle 6 fw classid
> 1:10
>
> The handle is the parameter that says to tc what mark you're using and
> fw is the parameter that says to tc that you're using a firewall mark.
And it's all in hex.
Stef
--
[EMAIL PROTECTED]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
