Jay,
I can't comment directly on it, but I've used the bridging setup in
a RedHat 7.3 machine recently. The last Twisted Pair to BNC tranceiver
we had broke, so I had to build one out of a Linux machine. Worked
great on a little network (don't ask why I had to keep the BNC around,
I'm still pissed about it).
Never had any problems with the bridge. It's was not on a network that
had managed switches, so it didn't have to do interact with any of that
to ensure no network loops, but for a simple bridge it works great.
Turned the machine on, let it run for 15 days no problems on the
network, found a replacement tranceiver and life was good.
I know I used the ancient bridging code in the 1.2 kernel and never
had any problems with it (it's been re-written since then I believe).
The new code is great, took 5 minutes to figure it out from the man
page. The only thing that thru me was you have to ifconfig up the
bridging interface.
Thanks,
Kirby
On Mon, 2003-02-24 at 12:27, Jay Wineinger wrote:
> Not really contributing to the discussion on MAC forwarding, but Im
> wondering about the maturity of linux bridging. I looked at the sourceforge
> page Martin posted and it seems that the last updates were made duing 2002,
> nothing in 2003 yet. Does this mean that bridging is fairly stable and
> complete or that development is just going slow? Just curious.
>
> Jay
>
> _______________________________________________
> LARTC mailing list / [EMAIL PROTECTED]
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
--
Real Programmers view electronic multimedia files with a hex editor.
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
