Hi! If I create the following setup:
66.8.28.52/29 66.8.28.51/29
+------+ +------+
| PC A |------+ +---------| PC B |
+------+ | | +------+
| |
eth1| | eth0
+-----+
| qos | (br0 = 66.8.28.49/29)
+-----+
PC A is connected to qos via crossover cable and PC B and qos is plugged
into same switch. So even though everything is on the same network, traffic
has to go through qos when PC A talks to PC B.
Now, if PC A ping PC B, then my packet counters on the PREROUTING, INPUT,
FORWARD, OUTPUT, POSTROUTING chains stay the same for both filter and mangle
tables - i.e. netfilter don't see any traffic flowing through the machine.
Why is this? How do I match this traffic using netfilter? I can't use
ebtables because I have to match traffic in the mangle table if I want to
use it in conjunction with tc.
--
Regards
Abraham
By the yard, life is hard.
By the inch, it's a cinch.
___________________________________________________
Abraham vd Merwe [ZR1BBQ] - Frogfoot Networks
P.O. Box 3472, Matieland, Stellenbosch, 7602
Cell: +27 82 565 4451 Http: http://www.frogfoot.net/
Email: [EMAIL PROTECTED]
pgp00000.pgp
Description: PGP signature
