On Monday 17 March 2003 22:01, Stephane Ouellette wrote:
> Folks,
>
> after spending a lot of time experimenting with HTB, I found that
> filters cannot be attached to HTB classes...
>
> The class hierarchy I use is the following (for my upstream internet link):
>
>
> PRIO (with priomap that sends everything by default to
> class 1:3)
> / | \
> / | \
> / | \
> 1:1 1:2 1:3
> PFIFO PFIFO HTB qdisc (default to 4:100)
The default class MUST be a leaf class. A leaf class is a class with no child
classes. If no filter is matched, the packet is dequeued in the default
class. This means that no filter is tested so your packets ends in 4:100.
The filters attached to 4:100 are never checked.
Stef
--
[EMAIL PROTECTED]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
