I have read the section http://lartc.org/howto/lartc.bridging.proxy-arp.html .
I configured my two ethernet devices with the same ip address .
Should i configure them with a specific command ?
I used : ifconfig eth0 192.168.47.104 netmask 255.255.255.0
ifconfig eth1 192.168.47.104 netmask 255.255.255.0
I tried to configure them with ip also .
eth0 Link encap:Ethernet HWaddr 00:90:27:72:B8:1D
inet addr:192.168.47.104 Bcast:192.168.47.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:9
eth1 Link encap:Ethernet HWaddr 00:00:E8:8D:0C:DC
inet addr:192.168.47.104 Bcast:192.168.47.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:9 Base address:0x2000
I checked for support in kernel
# dmesg |grep ip_
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 292 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
Is there any specific kernel option for proxy-arp ?
then i tried to enable proxy arp with :
echo 1 > /proc/sys/net/ipv4/conf/eth0/proxy_arp
echo 1 > /proc/sys/net/ipv4/conf/eth1/proxy_arp
but proxy_arp remains 0 , whatever i do .
Thank you for your help
Nikolaos Kefalas
--
http://www.freemail.gr - δωρεάν υπηρεσία ηλεκτρονικού ταχυδρομείου.
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
