You couldn't even if you wanted. High res timer requeres at least one of the faster pentiums (not all pentiums can do it).
If you can't get a stable latency in the end, it might be worthwhile to upgrade to a pentium, but for now I'd keep trying some finetuning. Jannes Faber ----- Original Message ----- From: "Thilo Schulz" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, June 18, 2003 2:32 PM Subject: Re: [LARTC] Low latency on large uploads - almost done but not quite. On Tuesday 17 June 2003 20:16, sufcrusher wrote: > Also make sure you patched the kernel to use the high resolution timer > (info at www.docum.org somewhere). That helped a lot in my case (you can > put the ceilingrates closer to the actual 128kbit and therefore reduce > latency as well). I'm not sure it's still necessary on 2.4.20 and/or > 2.4.21. I have a 133 Mhz AMD 486 - whether setting the resolution timer up would be very good for performance I don't know. - Thilo Schulz _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
