im in the process of configurating our network to have two upstream providers, it will
be loadbalanced
under normal operation and a complete failover if one of the lines would fail.
internet internet
| |
border border
| |
|- core router - |
|
lan
the "problem" im having is that i will not do nat on the core router, but on the
border routers.
the multipath default route is on the core router. from what i understand, could be
totally wrong,
you have to have nat, at least connection tracking on the core to make the multipath
route per
flow and not per packet.
any insight of this?
-tomas bonnedahl
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
