Hello Martin, Currently i am using this configuration.
In future they may run mail server then i have to go for new configuration where i have to give them the public ip address. Thanks Sathyan If you put your friends in NAT (Private IP), no problem .. They have webserver, all you have to do is forward packets going to port 80 to private ip:80 Further more read iptables-howto Regards, Rio Martin. Original Message: ----------------- From: Joe [EMAIL PROTECTED] Date: Wed, 25 Jun 2003 17:51:51 +0530 To: [EMAIL PROTECTED] Subject: [LARTC] Linux router and Bandwidth control Hello All, I have 1.5Mbits Backbone connection with 16 public ip address. I like to provide share my connection with someother my friends how will have public ip addess. So i wanted to configre linux router with bandwidth controll for my friends connection. Actully i tried with single interface in linux and CBQ but it does not controll. I should do not use NAT as my friends are running web servers. Is it possible to configure in linux.or some links to configure this Advance thanks Joe _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
