you probably need IMQ if eth0 is input for your case On Thu, 3 Jul 2003, [EMAIL PROTECTED] wrote:
> Dear folks, > Here goes my bandwidth manager: > > INTERNET > | > |eth0 202.14.41.1 > BW.Manager > | | > | +----eth1----192.168.1.0/24 > | > +------eth2----192.168.2.0/24 > > Total incoming bandwidth to eth0 is 1024kbps > should be shared to eth1 and eth2, which mean each get 512Kbps and > burstable to 1024Kbps if other host is idle. > > My question is how do i apply HTB to these situation ? > As far as i know eth1 and eth2 should be define as parent and cannot be as > children. > > Regards, > Rio Martin. > > > > -------------------------------------------------------------------- > mail2web - Check your email from the web at > http://mail2web.com/ . > > > _______________________________________________ > LARTC mailing list / [EMAIL PROTECTED] > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > > _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
