Hello there,
: The device is 100M.
: How to limit it to 1M?
Maybe you wish to use IMQ? [1]
Are you trying to simulate a 1MBit link?
If not IMQ, is this a router, or an endstation?
If a router, using HTB:
tc qdisc add dev $OUTSIDE root handle 1: htb default 1
tc class add dev $OUTSIDE parent 1: classid 1:1 htb rate 1Mbit
tc qdisc add dev $INSIDE root handle 1: htb default 1
tc class add dev $INSIDE parent 1: classid 1:1 htb rate 1Mbit
If an endstation, using HTB and policing:
tc qdisc add dev $OUTSIDE ingress
tc filter add dev $OUTSIDE parent ffff: protocol ip \
u32 match ip src 0.0.0.0/0 flowid :1 \
police rate 1Mbit mtu 12k burst 10k drop
tc qdisc add dev $OUTSIDE handle 1: htb default 1
tc class add dev $OUTSIDE parent 1: classid 1:1 htb rate 1Mbit
-Martin
[1] http://trash.net/~kaber/imq/
--
Martin A. Brown --- SecurePipe, Inc. --- [EMAIL PROTECTED]
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
