Ok, but what about my iproute/tc script for VoiP priorization? Any suggestion?
-----Messaggio originale-----
Da: John McCain [mailto:[EMAIL PROTECTED]]
Inviato: venerd� 5 settembre 2003 15.44
A: [EMAIL PROTECTED]
Oggetto: Re: R: [LARTC] time window in CBQ
I must recommend against using G723 unless you are in a very bandwidth starved
but high reliability situation. VOIP is extremely time sensitive, and the
latency involved in compression greatly reduces your margin for error. G711
uses more bandwidth (64k per call is a reasonable figure, but it depends on
packetization), but will be considerably more forgiving to jitter.
On Friday 05 September 2003 05:03 am, Catalin BOIE wrote:
> On Fri, 5 Sep 2003, Andreani Luca wrote:
> > is 64kbit/sec enough for VoIP ? I would have thought not.. but I do not
> > have VoIP...
>
> Steve, what voip codec do you use?
> If you can select, use G723 (6.3 kbit/s)
>
> > /steve
>
> ---
> Catalin(ux) BOIE
> [EMAIL PROTECTED]
> _______________________________________________
> LARTC mailing list / [EMAIL PROTECTED]
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
